Oakman, 1/12/2015 If you are planning on remaining a beginner then these are fine but..... The soles of the planes are not flat. Planes will only flatten a surface as flat as their soles and the ones I received are not flat and the work I would need to do in order to flatten the is excessive. The sides of both planes I received are not square. I sharpened the blades after cleaning the shipping oil from them. (they did arrive clean). I did get them adjusted to shave a nice thin strip off the piece I was working on but it was not flat due to the sole issues stated above. Had I performed these tests promptly upon receipt of the planes, I would have returned them. They will serve a purpose but they are not what I expected.
Building a bookcase or bookshelf is a fairly simple woodworking plan that you can get done in just a day or two. This is also a low-cost project as well and since the project idea is free, you don't have to worry about busting through your budget. Just follow the simple steps in the tutorial and enjoy your own company building a simple bookcase on this weekend.
Wood sold by the board foot may or may not be smooth on all sides and only one edge may be square. A board foot is a board that is 1 inch thick (called 4/4) by 12 inches wide by 1 foot long. To figure out how many board feet are in a piece of wood, multiply its length (measured in feet), width, and thickness (measured in inches) and divide this number by 12.
Don’t follow the temptation to cheap out and buy a cheap combination square. Because, like me, you will eventually have to replace it because of its inaccuracy. If you want your joinery to fit perfectly, then you need to scribe it accurately with precise marking tools. Unfortunately there is really only one company (that I know of) that makes a super accurate combination square. But fortunately it is amazing, and I use it daily. I’ll talk about it in-depth in the Layout & Measuring Tool Buying Guide.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
Woodworking For Dummies shows you how your raw buildingmaterials stack up, with everything you wood need to knowabout hardwood, softwood, plywood, veneer wood, plain-sawn wood,rift-cut wood, quarter-sawn wood, solid wood, man-made wood, andmore. This down-to-earth guide gives you the goods on how boardsare made from trees and the characteristics of hardwood andsoftwood species, plus all the buzz on
John, 9/18/2012 Arrived quickly and in a real beautiful box. I sharpened and honed the planes and used them to smooth some old cedar boards. They worked flawlessly even for this beginning woodworker. A real joy using these types of tools instead of power sanding tools and the like. I have never used a Spokeshave before but can already see that it will be very useful as I progress in my journey from welder to woodworking.
In 1900, just as it was when I was a student over 100 years later, the view is that it is better to buy a quality tool once that will last a lifetime than buy something of poor quality which will not serve you well in your work. Keep that in mind as you review the list — since the tools were not the cheapest back then and surely are not the cheapest today. But with this modest set of tools you can build an amazing array of projects just as many ‘Sloyders’ (Sloyd school students) have done before us.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
A marking knife is used for marking where you will be cutting with your saws. For getting into tight spots (like dovetails) and making very accurate lines (which is vital for tight fitting joints) you need just the right marking knife. You would think that any old knife would work, but you would be wrong. Years ago I purchased several that didn’t work well.
Many species of wood fall into two general categories: hardwoods and softwoods. Knowing which type of wood is which and being able to choose the right wood for your goals can help reduce the negative impact of the inherent instability that is a part of solid wood. As you discover the variability of wood, you’ll undoubtedly come to appreciate that some wood products allow you the same level of beauty without having to worry about the wood changing shape on you. These include veneers and manufactured wood products such as plywood and Medium Density Fiberboard (MDF). All this talk of wood is covered in more detail in Chapter 2.
I’d like to add some type of sharpening system to your list. A simple sandpaper and slab system, stones, or the more expensive slow grinder system. Although listed, files should be in this sharpening/maintenance category as well. You’ll need these as soon as you purchase a majority of hand tools. They’ll be needed throughout each day of using the tools. Initial setup and routine maintenance will give better results with less fighting the grain and tool. Whether your a beginner or a master, the tools must be sharp and maintained.
Always be on the lookout for usable wood. You might be able to salvage some. You can use a metal detector to find nails and screws. You don’t need a full fledged metal detector. I use a pinpointer made by Garrett. If your wood has some woodboring beetles you can still use it if not eaten too badly. A healthy dose of cyfluthrin will take care of them.
Thank you for this post. I am about three years into wood working with handtools. I didn’t want to be a handtool collector. I wanted a good set of tools I could use. Since funds were tight and I wasn’t sure if I would keep doing this, I wanted to build my tools slowly. What you outlined is more or less what I ended up getting and it has indeed served me well. One can easily do a lot with all of these tools. At some point about two years into the hobby, I had a much better feel for what I wanted to make and what I may or may not need beyond this.
My $0.02 worth. I agree with the thickness planer [mine is 10″] but anything over a 6″ jointer is expensive and space-consuming, so use hand planes as in your later blog. I inherited an 8″ table saw that my dad and I used to build a 12′ outboard boat back in 1955. I’ve used it for ripping, but I’m having second thoughts because of safety issues. Some have suggested a band saw for ripping, which is quieter and safer to use. I gave my router away [and hope to get rid of my Freud biscuit joiner and 6″ jointer]. A quality eggbeater drill works every bit [pun not intended] as well as a power drill, and they cost less. A coping saw and a jewelers saw negate the need for a jigsaw unless you are into making puzzles. Chris Schwarz has a video short on one of the Highland Woodworker series showing how to joint the edge of a board with a plane and a simple jig on the workbench surface. Another reason to bypass the jointer.
The owners, webmasters, administrators, authors and editors, expressly disclaim all and any liability to any person, whether a user of this website or not, in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance, whether whole or partial, upon the whole or any part of the contents of this website. Please exercise caution when working with any tools or machinery. Follow common safety rules and precautions as outlined in any manuals related to the equipment being used. If advice or other expert assistance is required, the services of a competent professional person should be sought.