Like you, I too am benchless. I built the “Mozilla” Molson vice variant from last year’s issue (I forget which) and it comes in handy for a lot of operations. I clamp it down to a piece of plywood that I have covered with formica (actually, it’s two pieces that I have piano-hinged together for easier storage) laid across two sawhorses. As long as lateral thrust is not involved, this is a pretty stable way to work. I also have a Zyliss vise for working on smaller pieces. I’ve made do for nearly forty years with a radial arm saw and circular saw. I have only recently acquired a planer and router table (both on wheels) It makes the garage croweded because also sharing the space are two motorcycles and about 400 board feet of rough sawn Camphor. I currently attend classes in woodworking and this coming semester I’ll be enrolled in a class for handtools only (and sharpening).
Block planes have become one of the most oft-used tools in a woodworker’s workshop. Some traditional woodworkers even keep them in their aprons! These little planes can be used to trim your joints, put chamfers on board edges, trim end grain, etc. I would recommend finding a low angle block plane, because the low angle lets you cut difficult grain more easily.
Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.
Woodworking is a fairly technical subject with its own rules and language. Because of this, I include a lot of terms you may not be familiar with. Rather than include a glossary of terms, I’ve chosen to provide definitions or cross-references for terms that are part of the woodworking vocabulary. These terms are in italics to help you identify them.
A staple of every For Dummies book, Part IV presents the Part of Tens. Chapter 19 includes ten good habits to get into to make your woodworking experience safer. Chapter 20 offers ten woodworking pitfalls that almost everyone encounters at one time or another. (Oh, and ways to avoid or fix them, too.) Chapter 21 gives you some woodworking resources so that you can keep expanding your woodworking knowledge.
But before you purchase clamps, build your first project and put it together without glue. Then see how many clamps you think you will need to put enough pressure in all the right spots. Then proceed to purchase that number of clamps. Repeat this process on your next project, and purchase more clamps if needed. See my buying guide for different clamp types, uses, and my favorite brands.
Super Chunky X Table Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid MegaMax, Diablo blades, Bosch drill bits and Makita … [Read more...]
Introduction.Part I: What's All the Buzz about Woodworking?Chapter 1: Discovering the Basics of Woodworking.Chapter 2: Wood You Be Mine? Appreciating Wood for All It's Worth.Chapter 3: Putting Safety First in Your Workshop.Part II: Tool Time: Selecting and Setting Up Your Equipment.Chapter 4: Gearing Up: Choosing Tools That Are Right for You.Chapter 5: Getting a Handle on Hand Tools.Chapter 6: Peeking at Portable Power Tools.Chapter 7: Introducing the Big Guns: Stationary Power Tools.Chapter 8: Setting Up Your Workshop and Maximizing Your Tools.Part III: Together Forever: Basic Wood Joinery.Chapter 9: Stuck on You: Using Adhesives and Glues.Chapter 10: Working with Wood Joints.Chapter 11: Making the Most of Mechanical Fasteners.Part IV: Getting Your Hands (and Shop) Dirty: Turning Raw Wood into Furniture.Chapter 12: Understanding the Building Process.Chapter 13: Banging Out Bookcases.Chapter 14: Tackling Tables.Chapter 15: Creating Cabinets.Part V: The Grand Finale: Sanding and Finishing Your Masterpiece.Chapter 16: Smoothin' It Out by Sanding and Filling.Chapter 17: Adding Color: Stains and Paints.Chapter 18: Protecting Your Work with Topcoats.Part VI: The Part of Tens.Chapter 19: Ten Great Habits to Get Into.Chapter 20: Ten Common Woodworking Pitfalls and How to Avoid Them.Chapter 21: Ten Great Woodworking Resources.Index.
Nightstand table plans have everything you need to create a bedside table to keep every needy thing at reach at night time. This Nigh Stand plan is quite different in design from the most of the other plans. This stand has not only the three regular drawers but also having a hidden drawer that uses a secret locking mechanism to keep contents securely.
I am finally getting to practice my woodworking more after years of collecting tools. By using tool reviews and thinking of the kind of work I would like to do, I have accumulated a nice set of tools without purchasing many mistakes. I decided to use Paul Sellers book and videos and start learning from the beginning. He starts with projects that begin with a small set of tools. One of those tools is a spokeshave. Even though I know much of what is in the first lessons, I have picked up a few new tricks, and am learning to use my tools more efficiently. My most important tools are my workbench and vise. The workbench was tough to build as I was on the floor using hand planes; not a good way to work. I have no jointer; did get a small planer and made a sled for it so I can flatten a board. My tools are in my house, so there is no room for a big table saw or bandsaw. I have a chopsaw and a piece of an old Craftsman tablesaw I got for free. It has to be moved outside to use. A circular saw with a guide is handy. My guide has a plate on which the saw is mounted. The plate slides on aluminum angle (with help of rollers) which is screwed to plywood. Once the initial cut is made in the plywood, the plywood is simply lined up with your cut marks and clamped down.
If I were to give someone new one piece of advice, it would be to buy their chisels new, not used. I have wasted more time and more money trying to save butchered chisels than I want to admit. There’s a good chance that the used chisel will be bellied in the back or pitted at the edge and it will take more than beginner skills to fix it. You may make things worse rather than better. Sure, learn to do this _some_ day, but maybe not as a beginner first thing. I’ve had similar problems with used planes, but it isn’t nearly as bad a problem for a joinery plane. If there are pits that lead to scratches, it may not matter for anything other than a final smoother. Also, a tiny back bevel may save the day on a plane, but you likely don’t want that on a chisel. So, I’m less fussed about planes and, if it all goes south, you can buy a new blade for smoothing work and use the old for rough work (all in the same plane). You can’t buy a new blade for a chisel. Well, you can, but it’s called buying a new chisel. I use 3/8″ a lot. 1/4, 3/8 to handle all the mortises and dovetails and either 3/4 or 1″ for paring shoulders and for fat parts of some dovetails. I probably learn towards the 1″ because there are times you want to reference off the blade to keep moving in a line, like for a housing. I think Lee Valley’s version of the Narex are excellent and mine came with flat backs that could go straight to polishing.
A marking knife is used for marking where you will be cutting with your saws. For getting into tight spots (like dovetails) and making very accurate lines (which is vital for tight fitting joints) you need just the right marking knife. You would think that any old knife would work, but you would be wrong. Years ago I purchased several that didn’t work well.