As someone who finds hand planing a challenge the minimalist approach seems like the best way to truly learn a tools quirks and develop the skill required. So the Veritas BU planes are going along with the Tormek required to sharpen those gargantuan irons and a diamond plate and oil stone are on the way to get my old Stanley no 5 humming. I never found a sharpening routine that didn’t look a ball ache to keep the BU planes working well and being a stick thin wimp the weight of the buggers for anything more than controlled smoothing shavings knackered me out.
On chisels, once a new comer learns to sharpen, Aldi sells a 4 chisel pack for about $20 US. They are blunt and the backs need to be flattened but once correctly sharpened, they hold their edge very well. These are my go to chisels for most work and they’re as sharp as a scalpel. My good chisels haven’t seen the light of day in over a year as the Aldi chisels work beautifully.
Oakman, 1/12/2015 If you are planning on remaining a beginner then these are fine but..... The soles of the planes are not flat. Planes will only flatten a surface as flat as their soles and the ones I received are not flat and the work I would need to do in order to flatten the is excessive. The sides of both planes I received are not square. I sharpened the blades after cleaning the shipping oil from them. (they did arrive clean). I did get them adjusted to shave a nice thin strip off the piece I was working on but it was not flat due to the sole issues stated above. Had I performed these tests promptly upon receipt of the planes, I would have returned them. They will serve a purpose but they are not what I expected.
I’m not sold on the need for a power jointer for flattening a surface. That said, I do have a Shopsmith 4″ jointer.. It’s great for jointing edges, and perhaps flattening the occasional rails and stiles, but it of course is inadequate for surfacing wide boards. Would a six inch jointer be better…..not by much. So what do we do? Go to an eight inch, or better yet a ten inch jointer? Now we’re getting into really big, heavy, and electrically hungry machines that are not really suitable for the small shop that is likely to be in a small shed or garage.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
Thank you for this post. I am about three years into wood working with handtools. I didn’t want to be a handtool collector. I wanted a good set of tools I could use. Since funds were tight and I wasn’t sure if I would keep doing this, I wanted to build my tools slowly. What you outlined is more or less what I ended up getting and it has indeed served me well. One can easily do a lot with all of these tools. At some point about two years into the hobby, I had a much better feel for what I wanted to make and what I may or may not need beyond this.
Go through all your wood and lay out where each cut is going to go. Choose the most appropriate part of the board for each part of the project. For instance, choose matching tabletop pieces for grain patterns and color consistency. Also, plan your cuts so that you do the minimum of saw adjustments (do all the crosscuts first and then all the rip cuts, for example).

This snowman kit post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. The snowflakes are falling softly on the ground. You grab your hat, coat and mittens and head outside to test the snow. … [Read more...]
And the fact is that you can make your own patio chair with several old but still good pallets. Here we are providing a tutorial that everybody can follow easily – it is very well-written and also self-explanatory, which is great for those who are a beginner at woodworking and have never completed a DIY project before. As you don’t need to be a professional woodworker or a handyman to complete this project, so it is not a difficult task – all you need is a bit of determination!​
Of course, these wood joints would be almost useless without some sort of adhesive to go with them. Chapter 9 walks you through the most common types of adhesives available for woodworkers and shows you the best one for each job. In Chapter 11, I go over the ins and outs of screws and nails and show you when and where to use them to improve the strength of your joints.
From the source tutorial, you can get illustrates to the instruction about the plan. Everything is fairly described as diagrams, images, the list of supplies and tools need etc. The process to this plan is very easy to understand and follow for if you are having some basic woodworking knowledge. Make sure to collect all the supplies you need before you start with the project. You may even ask any question directly in the comment section of the tutorial post and also comment the images of your final product if you have completed it. Either way, I hope that you will manage to build this one nicely.​
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Dividers (or compass) are used for taking and repeating a measurement over and over again on a work piece. Traditional woodworkers rarely take measurements with a tape measure when doing fine joinery work, but rather take a measurement with dividers then transfer that arbitrary (yet accurate) measurement to another work piece. This removes a degree of inaccuracy.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.

This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
Dummies has always stood for taking on complex concepts and making them easy to understand. Dummies helps everyone be more knowledgeable and confident in applying what they know. Whether it's to pass that big test, qualify for that big promotion or even master that cooking technique; people who rely on dummies, rely on it to learn the critical skills and relevant information necessary for success.
I agree, that’s a nice and easy set up to start with. I’d say a block plane it’s handy for small areas, and touch ups. A no.5 is excellent but a bit heavy and tiring sometimes. I find that a nice rabbet block plane (shoulder + block) with two irons with different sharpening angles it’s essential to me. One fine flat rasp and a medium flat file would complete my set.
For woodworking, you want wood with few defects and as good a grain pattern as possible. For the most part, you want the top two grades of wood: Firsts and Seconds. These two are often grouped together and referred to as FAS (Firsts and Seconds). Most decent lumberyards are well stocked with FAS boards and some Selects. The common classes aren’t used in furniture-making because they contain far too many defects.
I dedicate several chapters in this book to exploring the exciting world of tools. From age-old hand tools to the most modern machine for milling wood, Chapters 5, 6, and 7 cover them all (well, not all of them, that would be insane, not to mention take up the entire book). Not only do you get to see what tools are what, you also get a glimpse into how to use each of them safely and effectively.
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
*Northern Ireland, Scottish Highlands and Islands usually receive a 2-3 working day service for First Class. For Tracked Courier, it’s a 2 working day service and you need to order by 15:00. Unfortunately, we don't currently offer Express Delivery outside the UK, Gibraltar, Guernsey or Jersey. All deliveries are subject to cut-off times and public holidays.

As someone who finds hand planing a challenge the minimalist approach seems like the best way to truly learn a tools quirks and develop the skill required. So the Veritas BU planes are going along with the Tormek required to sharpen those gargantuan irons and a diamond plate and oil stone are on the way to get my old Stanley no 5 humming. I never found a sharpening routine that didn’t look a ball ache to keep the BU planes working well and being a stick thin wimp the weight of the buggers for anything more than controlled smoothing shavings knackered me out.


WoodAndShop.com recommends products, with links to online stores, some of which are part of affiliate programs. If users make purchases in those stores (e.g. ebay.com and Amazon.com) those affiliate links lead to referral compensation to us. These payments are very helpful to us, and add no additional fees to our users, so we are grateful for anyone who uses the affiliate links. We run our website based on principles of integrity, and don’t recommend any product that we wouldn’t use ourselves. Any product claim about a service or product should be verified with the manufacturer.
After you have smoothed the wood, you can then decide whether you want to add any color and, if so, what type. You can choose from stain or paint and from water-based, oil-based, or lacquer-based products. You have many options and I’m sure you can find one that works for you. Chapter 17 helps you make sense out of all the choices and shows you how to apply these products.
Many species of wood fall into two general categories: hardwoods and softwoods. Knowing which type of wood is which and being able to choose the right wood for your goals can help reduce the negative impact of the inherent instability that is a part of solid wood. As you discover the variability of wood, you’ll undoubtedly come to appreciate that some wood products allow you the same level of beauty without having to worry about the wood changing shape on you. These include veneers and manufactured wood products such as plywood and Medium Density Fiberboard (MDF). All this talk of wood is covered in more detail in Chapter 2.

*Northern Ireland, Scottish Highlands and Islands usually receive a 2-3 working day service for First Class. For Tracked Courier, it’s a 2 working day service and you need to order by 15:00. Unfortunately, we don't currently offer Express Delivery outside the UK, Gibraltar, Guernsey or Jersey. All deliveries are subject to cut-off times and public holidays.
You need tools to work with wood. And most woodworkers think tools are great. I know I love buying and using tools. Heck, I’m the first to admit I have a problem. (Does anyone know of a 12-step program for tool addicts?) I buy tools like candy (well, more than I buy candy, actually). I have special tools for almost any imaginable task and I can’t ever seem to get enough. Such is the life of a woodworker.
A marking knife is used for marking where you will be cutting with your saws. For getting into tight spots (like dovetails) and making very accurate lines (which is vital for tight fitting joints) you need just the right marking knife. You would think that any old knife would work, but you would be wrong. Years ago I purchased several that didn’t work well. 
×