I’m not sold on the need for a power jointer for flattening a surface. That said, I do have a Shopsmith 4″ jointer.. It’s great for jointing edges, and perhaps flattening the occasional rails and stiles, but it of course is inadequate for surfacing wide boards. Would a six inch jointer be better…..not by much. So what do we do? Go to an eight inch, or better yet a ten inch jointer? Now we’re getting into really big, heavy, and electrically hungry machines that are not really suitable for the small shop that is likely to be in a small shed or garage.
Of course, these wood joints would be almost useless without some sort of adhesive to go with them. Chapter 9 walks you through the most common types of adhesives available for woodworkers and shows you the best one for each job. In Chapter 11, I go over the ins and outs of screws and nails and show you when and where to use them to improve the strength of your joints.
Other than the panel saw, all my kit fits into a 50x33x17cm wooden wine box. After years of relying on power tools for everything, I’ve found this minimalist approach very refreshing. Asking myself ‘will it fit in the box?’ helps me to curb ‘add to basket’ tendencies. My only additions to your list are a Stanley No. 18 block plane, a Lie Nielsen dowel plate and a small engineers set square, all non-essential but they do get used.
To see if ShippingPass is right for you, try a 30-day free trial. Also, with ShippingPass, there is no need to worry about commitment. If you decide you want to discontinue the service, you can cancel your subscription at any time. No matter what your shipping needs, Walmart's got you covered. Sign up for ShippingPass so you can shop more, save money and live better.
While some people consider the circular saw to be more of a carpentry tool than a fine woodworking tool, but some would disagree. There may be no more versatile basic handheld power tool than a circular saw. When used with a clamp-on straight-edge, the circular saw can be just about as accurate as a table saw and handle quite a few of the tasks that one would attempt with a table saw, particularly cutting sheet goods such as plywood or medium-density fiberboard. When woodworking on a budget, a quality circular saw should be the first handheld power tool purchased, as it is the one that will likely be the most useful as you get started.
I have used a Workmate successfully for years and I am in the process of building an upgraded replacement for the work surfaces. My replacement bench top will be a little longer, much thicker and it will have and extended apron between the two halves to greatly improve holding wood vertically for dovetailing. With this simple upgrade it turns the little Workmate into a very capable portable woodworking bench.

This is a super cheap option for a pretty diverse tool. Like, how wrong can you go for $34, right? This tool rocks for doing cuts on larger pieces of wood that need to be more detailed than your circular saw will allow. For more detailed work I would totally go for a scroll saw, or even a band saw. But if you are building your tool box, this is a much more approachable item, both price wise and in terms of ability to be used in diverse ways. And, hey, woodworking isn’t exactly inexpensive, right?

Dan, I’m worried about you. The stress must be getting to you. Somehow you’ve lost your ability to count. By my estimation, your list has at least 29 items, some of which are actually “sets” of items, like chisels or crayons, which I only counted as one item. Perhaps you need a break from all that blogging, and time to get back to basics, like counting. I can help. Come over to my shop and we can count things like parts, items on the honey-do list, and for extra credit, screw holes. Don’t worry about making mistakes, I’ll guide you through it, and we can round up if necessary. Ha!


Someone on here made the point that it took them a few years before they got a clear idea about what they wanted to make. I can relate to that. I’m starting to think that I’d like to do a cabinet type build so maybe a plough plane would help with that. There are plenty of old Stanley’s knocking around on Ebay. On the other hand, I’m in no hurry to buy anything else – I feel much more inclined now to make do and explore the limitations of tools that I’ve got.

Delta 22-590 13 in. portable thickness planer includes: Delta 22-590 13 in. portable thickness planer includes: 3 cutting knives cutter head wrench dust chute with 4 in. port and magnetic blade changing tool. High-speed steel indexed double-sided knives provides 2X blade life and allows for quick blade changes. Oversized cutter head height adjustment handle with indexing ring provides ...  More + Product Details Close
Through and through milling is the simplest and most efficient way to cut a log. Milling through and through results in plain-sawn, rift-sawn, and quarter-sawn boards because the orientation of the growth rings changes as the boards are sliced off the log (see the Choosing the right wood cut for you section later in this chapter for more information).
A staple of every For Dummies book, Part IV presents the Part of Tens. Chapter 19 includes ten good habits to get into to make your woodworking experience safer. Chapter 20 offers ten woodworking pitfalls that almost everyone encounters at one time or another. (Oh, and ways to avoid or fix them, too.) Chapter 21 gives you some woodworking resources so that you can keep expanding your woodworking knowledge.
Great book to dip your toe before you invest several hundred or thousand dollars in tools and equipment. The author does a great job breaking down such things as growth rings, seasonal movement, wants vs. needs as far as tools and equipment and what it takes to get started in woodworking as a hobby or potential source of income. A great and easy read that has come in handy time and again for reference as well as a recommended reading for others interested in this hobby.
Other than the panel saw, all my kit fits into a 50x33x17cm wooden wine box. After years of relying on power tools for everything, I’ve found this minimalist approach very refreshing. Asking myself ‘will it fit in the box?’ helps me to curb ‘add to basket’ tendencies. My only additions to your list are a Stanley No. 18 block plane, a Lie Nielsen dowel plate and a small engineers set square, all non-essential but they do get used.

Dividers (or compass) are used for taking and repeating a measurement over and over again on a work piece. Traditional woodworkers rarely take measurements with a tape measure when doing fine joinery work, but rather take a measurement with dividers then transfer that arbitrary (yet accurate) measurement to another work piece. This removes a degree of inaccuracy.
John, 9/18/2012 Arrived quickly and in a real beautiful box. I sharpened and honed the planes and used them to smooth some old cedar boards. They worked flawlessly even for this beginning woodworker. A real joy using these types of tools instead of power sanding tools and the like. I have never used a Spokeshave before but can already see that it will be very useful as I progress in my journey from welder to woodworking.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
A marking knife is used for marking where you will be cutting with your saws. For getting into tight spots (like dovetails) and making very accurate lines (which is vital for tight fitting joints) you need just the right marking knife. You would think that any old knife would work, but you would be wrong. Years ago I purchased several that didn’t work well.
×