Super Chunky X Table Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid MegaMax, Diablo blades, Bosch drill bits and Makita … [Read more...]
John, 9/18/2012 Arrived quickly and in a real beautiful box. I sharpened and honed the planes and used them to smooth some old cedar boards. They worked flawlessly even for this beginning woodworker. A real joy using these types of tools instead of power sanding tools and the like. I have never used a Spokeshave before but can already see that it will be very useful as I progress in my journey from welder to woodworking.
A woodworking project wouldn’t be complete without the finish. Part V helps you make this often hated (trust me, I’m being nice here) process of sanding and finishing into a chore that you’ll love (okay, maybe just tolerate). Chapter 16 explores the often short-shrifted process of filling and sanding the wood smooth. Chapter 17 shows you how to add color to the wood. Chapter 18 demystifies the topcoat process. In this chapter, you discover the best type of finish for your project and go through the steps of applying it for best results.
One of the most important aspects of woodworking is understanding the properties of wood. I know this seems obvious, but you’d be surprised about how many woodworkers I talk to who don’t know why wood acts the way it does. Wood changes with the weather and the stresses put upon it (such as when it’s stacked in a pile under a bunch of other wood). It expands and contracts and can twist, warp, or cup depending on the stresses that exist within it (from the direction of the grain in the board). Being able to look at a board and determine where those stresses are and how they may impact the board as it experiences changes in humidity requires some basic understanding of wood and how it’s made.
For very many years (since the early 70’s) I built furniture, that I still have and use, with a Stanley No4 as my one and only plane – and only one blade for it. I still have, and use, that same plane. I now have other planes, but the first one is still my ‘go to’ plane. I have just given away my set of chisels, to my son, as I have collected a few old wooden handled ones which I now prefer, but those old blue plastic Marples set did me well for about 25 years.
Below you will find some of the free woodworking plans to be found on the net. Much of the information was gathered from the newsgroup rec.woodworking (also available via google groups). This list is far from complete. I'd suggest you learn to use a search engine like Altavista or Google. Just type in the project name you want to do, and "plans". This will help you find all sorts of things.
After you have smoothed the wood, you can then decide whether you want to add any color and, if so, what type. You can choose from stain or paint and from water-based, oil-based, or lacquer-based products. You have many options and I’m sure you can find one that works for you. Chapter 17 helps you make sense out of all the choices and shows you how to apply these products.
Finally, a workbench. Like most people, I started with a DIY workbench that totally did the trick for the first couple of years. I recently upgraded to a Kreg workbench, and it is awesome. It moves around so smoothly, it’s incredibly durable and strong, and it combines form and function in ways that make my heart sing. If you, like me, are working out of a garage or small shop, consider the value of something that moves about extremely well, and that is adaptable to your needs. They have several sizes to choose from, so I’ll link to the main product page.
Just for the record, a jointer and planer are not from the ICDT kit – the philosophy on that column is, indeed, beginner AND basic (hence the Workmate). The tools we suggest in the ICDT manual are for those who are working at a kitchen table or in a backyard; the tools the editors would recommend for someone who is quite sure he or she wants to pursue serious furniture making would be rather different.
Dan, my work space that is available for power tools is quite small, about 6′ x 20′. It may seem like a lot on the surface, but a long rectangle is a bear to work in. It requires a lot of serpentine action. That said, I don’t have too much room for large footprint tools. I have settled finally on three big tools; a small bench saw, a thickness planer, and a drill press. I had to forgo the jointer, so I use hand tools to make up for it’s absence (as I do with a lot of my hand tool techniques). I have gotten to the point where I can flatten one side and true an edge of a board reasonably quick. I then finish it up with the thickness planer and table saw, giving me a nice flat board. I guess what I am basically saying is, there’s more than one way to skin a cat, and don’t write off hand tools as a quaint way to experience the past. They worked for thousands of years, and still do! Thanks for the blogs, they make for great reading.
No joke. As you get into building you’ll discover that woodworkers use jigs for everything, and that can be intimidating. The Kreg Jig company has absolutely knocked it out of the park in making jigs accessible, easy to use, and so incredibly useful that you’ll wonder why you didn’t think of that. They are affordable, and after just one build you will be singing the holy Kreg praises. I won’t go into each one, though I am happy to answer any questions you may have. Here’s a list of the jigs I have used and found incredibly helpful. (It’s a growing list!)
We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!
To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.
As someone who finds hand planing a challenge the minimalist approach seems like the best way to truly learn a tools quirks and develop the skill required. So the Veritas BU planes are going along with the Tormek required to sharpen those gargantuan irons and a diamond plate and oil stone are on the way to get my old Stanley no 5 humming. I never found a sharpening routine that didn’t look a ball ache to keep the BU planes working well and being a stick thin wimp the weight of the buggers for anything more than controlled smoothing shavings knackered me out.
Like yourself, I get great satisfaction from working with this small kit. Similar to your wine box, I’ve got this old ‘sausage box’ that I can fit everything in, if I’m out the job site or such. It’s a lovely feeling to know that with just this small box of tools, I can pay all my bills and eat. I just wish I could get the rest of my life so minimal!