Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.


The fourth most important basic handheld power tool every beginner should buy is a random orbital sander. While palm sanders are less expensive and can use plain sandpaper (cut into one-fourth sections), the random orbital version uses hook-and-loop fastened sanding disks, and doesn't sand in patterns, using instead a random sanding motion. This will motion will serve to reduce the chance that any sanding marks may appear on the stock due to the sanding. Of course, be certain that your local woodworking supplier has sanding disks readily available in a number of grits to fit the model that you choose, as the key to proper sanding is to use progressively finer grits as you sand to reduce or remove any marks that are left behind from the previous sanding.
Building a bookcase or bookshelf is a fairly simple woodworking plan that you can get done in just a day or two. This is also a low-cost project as well and since the project idea is free, you don't have to worry about busting through your budget. Just follow the simple steps in the tutorial and enjoy your own company building a simple bookcase on this weekend.
I use chisels perhaps more than any other tool in my workshop, so it’s a good idea to not cheap out here. A high quality set of bevel edge bench chisels (new or vintage) will last you many years (likely  your entire life) and will be used on nearly every project. I’ve used some descent affordable plastic handle bench chisels, but highly prefer lighter wooden handle chisels with excellent steel.
Speaking of safety, woodworking is one of the most dangerous hobbies that you can get into. Wood is harder than skin and bone, and the tools that you use to cut and shape wood can do real damage real fast if you happen to slip or make a mistake. Not to worry, though. Chapter 3 gives you the heads up on creating a safe shop in which to work and on keeping safe while working. As an added bonus, Chapter 19 offers ten habits to get into that can make your woodworking time accident free.
However, I would recommend that you either build a wooden workbench, or purchase one if you feel a workbench build is too advanced for you right now. However, I created the DVD “Building the Portable Moravian Workbench with Will Myers” so that even beginners can build a solid, portable, and very affordable workbench that will fit almost anywhere, using mostly or only hand tools. You can buy it in my store here. You can find Will’s free workbench plans for the Moravian Workbench here. Whichever path you choose, make sure you choose to either build or buy a heavy & sturdy wooden workbench, with at least a 3″ solid top, strong supportive base legs, and two strong vises.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
I dedicate several chapters in this book to exploring the exciting world of tools. From age-old hand tools to the most modern machine for milling wood, Chapters 5, 6, and 7 cover them all (well, not all of them, that would be insane, not to mention take up the entire book). Not only do you get to see what tools are what, you also get a glimpse into how to use each of them safely and effectively.
Periodically people ask what I recommend as far as tools to build and begin their own DIY woodworking adventure. The journey looks different for everyone, and we all end up picking our own favorite things to focus on, of course. But there are some basic things most of us agree on. For this list of recommended items I picked the brains of some of my fellow woodworkers, and found a few common items. For a few of these I’ll reference you to a tutorial so you can learn more if you like.
The final step in any woodworking project is protecting the wood from moisture and damage. Chapter 18 includes lots of information about the most common types of topcoats. Because not all of them provide the same degree of beauty and protection, you get a chance to compare the pros and cons of each topcoat so that you can choose the best option for you and your project.
In this guest perspective from Bill Rainford, traditional joiner, we learn a powerful method for analyzing today’s tool prices and thinking about which tools you really need in your shop. This article is about woodworking hand tools, but as someone who has visited Bill’s shop, I can tell you that he is no hand-tool purist. You’d love some of the machinery, new and old, he has acquired and cared for over the years.
Once you have the four aforementioned handheld power tools in your arsenal and you've had time to get comfortable with using them, its time to make your first (and likely most important) major tool purchase. The table saw is the heart and soul of every woodworking shop, the centerpiece around which all of the other tools are used and organized, so you'll want to buy the best table saw that your budget can comfortably afford. Take the time to learn which features you really want and the table saw that best fits your budget and your needs. This article will show you the most common features, and how to determine what features you need and how to know if those features are really well built, or simply added on to the saw because they are selling features.
Introduction.Part I: What's All the Buzz about Woodworking?Chapter 1: Discovering the Basics of Woodworking.Chapter 2: Wood You Be Mine? Appreciating Wood for All It's Worth.Chapter 3: Putting Safety First in Your Workshop.Part II: Tool Time: Selecting and Setting Up Your Equipment.Chapter 4: Gearing Up: Choosing Tools That Are Right for You.Chapter 5: Getting a Handle on Hand Tools.Chapter 6: Peeking at Portable Power Tools.Chapter 7: Introducing the Big Guns: Stationary Power Tools.Chapter 8: Setting Up Your Workshop and Maximizing Your Tools.Part III: Together Forever: Basic Wood Joinery.Chapter 9: Stuck on You: Using Adhesives and Glues.Chapter 10: Working with Wood Joints.Chapter 11: Making the Most of Mechanical Fasteners.Part IV: Getting Your Hands (and Shop) Dirty: Turning Raw Wood into Furniture.Chapter 12: Understanding the Building Process.Chapter 13: Banging Out Bookcases.Chapter 14: Tackling Tables.Chapter 15: Creating Cabinets.Part V: The Grand Finale: Sanding and Finishing Your Masterpiece.Chapter 16: Smoothin' It Out by Sanding and Filling.Chapter 17: Adding Color: Stains and Paints.Chapter 18: Protecting Your Work with Topcoats.Part VI: The Part of Tens.Chapter 19: Ten Great Habits to Get Into.Chapter 20: Ten Common Woodworking Pitfalls and How to Avoid Them.Chapter 21: Ten Great Woodworking Resources.Index.
The Delta 22-555 Portable Thickness Planer is great The Delta 22-555 Portable Thickness Planer is great for professional results in the woodworker's shop. It features two polyurethane feed rollers for a no-slip grip on the work piece; positioned close to the cutter head to improve work piece finish. The machine also has precision machined steel cutter head for ...  More + Product Details Close
If we are out of stock on something you have ordered, we ask you to be patient. We won't forget you or your order, and will ship the missing item within 24 hours after we get it in our warehouse (the expected date on your order is based on the information available at order time). You can cancel a backorder at any time by notifying us by phone, mail, fax or e-mail.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.

It is my understanding that frame saws are standard to a continental toolkit. Richard’s list of a hard-point handsaw, 10-12” backsaw, and coping saw is a very standard British/American toolkit, that preforms the same roles as the frame saws you detailed. All three are available in every hardware store in America and I assume in Britain, true hardware store back saws are now junk and to get something new that preforms as well an old Disston, like Richard stated, you have to upgrade to likes of Veritas and Lie-Nielsen.


Dummies has always stood for taking on complex concepts and making them easy to understand. Dummies helps everyone be more knowledgeable and confident in applying what they know. Whether it's to pass that big test, qualify for that big promotion or even master that cooking technique; people who rely on dummies, rely on it to learn the critical skills and relevant information necessary for success.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
I have used a Workmate successfully for years and I am in the process of building an upgraded replacement for the work surfaces. My replacement bench top will be a little longer, much thicker and it will have and extended apron between the two halves to greatly improve holding wood vertically for dovetailing. With this simple upgrade it turns the little Workmate into a very capable portable woodworking bench.
×