To start off you only need either a 1/4″ or 3/8″ mortise chisel (or some size close to those). You don’t need a whole set of mortise chisels. Mortise chisels (also spelled “mortice”) are used for chopping mortises (rectangular holes) into the side of your board for insertion of a tenon. “Mortise and Tenon” is a very common and very strong joint that most people have heard of.
Sometimes Grandparents can be hard to buy gifts for, they seem to have everything already. But hey you can't go wrong with darling gifts of grand kids, right!?! In this post I'm going to share a couple of ideas for personalized photo gifts. To make the photo gifts, I will be using Photoshop Elements 2018. I have been using Photoshop Elements ever since I graduated from trying … [Read more...]
The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
Through and through milling is the simplest and most efficient way to cut a log. Milling through and through results in plain-sawn, rift-sawn, and quarter-sawn boards because the orientation of the growth rings changes as the boards are sliced off the log (see the Choosing the right wood cut for you section later in this chapter for more information).

Products and systems by Lamello have always been Products and systems by Lamello have always been designed for longevity and reliability. This legendary durability is combined with environmental stewardship in view as strict environmental regulations at our production site in Switzerland ensure that all resources are used with consideration many of them stemming from sustainable husbandry and management. ...  More + Product Details Close
This book is organized modularly, which means that you can read it from cover to cover and progressively build your woodworking knowledge. Or you can skip around and choose a subject that interests you from the table of contents or index, and start reading it immediately without feeling lost. Throughout the book I also include cross-references to where you can find more information about a subject.
This wood bench plan is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. My neighbor saw a cute wood bench at a local restaurant and wanted one for her house.  She snapped a few pics for me, … [Read more...]
Two things which I took to instantly and now wouldn’t want to do without are an old-fashioned two foot, four fold ruler which gets used all the time (there’s nothing that comes close to it) and a 1 1/2″ butt chisel which gets used all the time for marking anything which needs to be chopped e.g. the side of a mortice. It also means fewer chops and therefore a bit more accuracy when cutting out a knife wall.
Speaking of rugged simplicity and hand tools kit – I’m very surprised to not see an axe in it! I still remember how I was amazed to see a board being split by an axe in the spoon rack premium video. Do you plan to make a blog post on this sort of topic (also because not everyone has access to premium videos)? Would be interesting to see what other coarse tools you use and when and why, and your thoughts around them. After all, the longer we stay at coarse stage the less time it will take to make something and the more efficient we are.
If we are out of stock on something you have ordered, we ask you to be patient. We won't forget you or your order, and will ship the missing item within 24 hours after we get it in our warehouse (the expected date on your order is based on the information available at order time). You can cancel a backorder at any time by notifying us by phone, mail, fax or e-mail.
After you have smoothed the wood, you can then decide whether you want to add any color and, if so, what type. You can choose from stain or paint and from water-based, oil-based, or lacquer-based products. You have many options and I’m sure you can find one that works for you. Chapter 17 helps you make sense out of all the choices and shows you how to apply these products.
Like yourself, I get great satisfaction from working with this small kit. Similar to your wine box, I’ve got this old ‘sausage box’ that I can fit everything in, if I’m out the job site or such. It’s a lovely feeling to know that with just this small box of tools, I can pay all my bills and eat. I just wish I could get the rest of my life so minimal!
The very affordable coping saw (often around $20) is regularly used for rough cutting shapes in the board, but especially for removing waste from dovetail joints (one of the most common wood joints). An affordable coping saw will work just fine as long as you have plenty of replacement blades on hand (also very affordable). Read my hand saw buying guide for more detail on brands & features to look for when purchasing a coping saw.

I sincerely hope this list is helpful to you! Learning to build – to create from scratch things of beauty and function – has been one of the most personally satisfying and empowering experiences I have ever had. I love to see people take up tools and find their creative voice. Wherever you are at in your journey, from learning to read a tape measure to hand tooling furniture in your sleep, we are all in this together. So jump in, get your hands dirty, and let’s build something!
Woodworking is a fairly technical subject with its own rules and language. Because of this, I include a lot of terms you may not be familiar with. Rather than include a glossary of terms, I’ve chosen to provide definitions or cross-references for terms that are part of the woodworking vocabulary. These terms are in italics to help you identify them.
Through and through milling is the simplest and most efficient way to cut a log. Milling through and through results in plain-sawn, rift-sawn, and quarter-sawn boards because the orientation of the growth rings changes as the boards are sliced off the log (see the Choosing the right wood cut for you section later in this chapter for more information).
Jeff Strong, of Lamy, New Mexico is not only an accomplished craftsman and woodworker, but is also author of Drums For Dummies and Home Recording For Dummies.  Jeff began creating sawdust at a very early age while assisting his father, a master craftsman, build fine furniture.  He has designed and build countless pieces of furniture and has recently completed the designs for a commercial line of furniture blending Arts and Crafts and Asian infuences which has already secured representation with a gallery in Santa Fe, New Mexico.
2 small Japanese pull saws, a western push saw, fret saw, set of chisels, bit brace with a roll of arbor bits, rabbet plane, side rabbet (trim) plane, 2 shoulder planes, 3 set of diamond stones, slip stone, multiple files, a rasp or two, 2 small bar clamps, a mini vise, hand scrapers, scratch beader with cutters, combination plane with cutters, smoothing plane, jack plane, block plane, combination square, steel straight rule, 12′ tape measure, small bottle of glue, a few short dowels, 2 marking gauges, and a few different marking instruments (awl, pencils, marking knife).
Wood sold by the board foot may or may not be smooth on all sides and only one edge may be square. A board foot is a board that is 1 inch thick (called 4/4) by 12 inches wide by 1 foot long. To figure out how many board feet are in a piece of wood, multiply its length (measured in feet), width, and thickness (measured in inches) and divide this number by 12.

Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.


With the right tools and materials, what you build is only limited by your imagination and creativity. So why not have a little fun with the kids and teach them something at the same time? Our woodworker tools and woodworking supplies will help you put together an easy birdhouse, squirrel feeder or butterfly house. The kids will love to use our paint samples to add their creative touch, and will enjoy displaying the finished product in the backyard.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
A marking knife is used for marking where you will be cutting with your saws. For getting into tight spots (like dovetails) and making very accurate lines (which is vital for tight fitting joints) you need just the right marking knife. You would think that any old knife would work, but you would be wrong. Years ago I purchased several that didn’t work well.
×