In this guest perspective from Bill Rainford, traditional joiner, we learn a powerful method for analyzing today’s tool prices and thinking about which tools you really need in your shop. This article is about woodworking hand tools, but as someone who has visited Bill’s shop, I can tell you that he is no hand-tool purist. You’d love some of the machinery, new and old, he has acquired and cared for over the years.
The very affordable coping saw (often around $20) is regularly used for rough cutting shapes in the board, but especially for removing waste from dovetail joints (one of the most common wood joints). An affordable coping saw will work just fine as long as you have plenty of replacement blades on hand (also very affordable). Read my hand saw buying guide for more detail on brands & features to look for when purchasing a coping saw.
With all this tool talk, you’ll probably be tempted to buy every one that I describe in this book. Well, to keep you from going broke, I offer some advice on which tools to buy when, so that you can slowly and sanely build your workshop as you build your woodworking skills. See Chapter 4 for more on this topic. Chapter 8 helps you set up your shop so that you can get to all of your tools without hassle. You can also explore shop essentials, such as lighting and electrical requirements, to ensure that you can see what you’re doing and can run all the tools you want to use.
The Delta 22-555 Portable Thickness Planer is great The Delta 22-555 Portable Thickness Planer is great for professional results in the woodworker's shop. It features two polyurethane feed rollers for a no-slip grip on the work piece; positioned close to the cutter head to improve work piece finish. The machine also has precision machined steel cutter head for ... More + Product Details Close
11-2. Pipe clamps, I have about 10 of them with varying lengths of black pipe in 1′ increments. I can switch out the clamps for larger lengths on larger projects, or downsize as needed. (very rarely do I need more than 6 clamps on a project during drying time, and when I do, it’s time for a cup of coffee and a 1/2 hour break while I wait) You keep your initial investment down, and buy them as you need them to increase your collection.
The key to making furniture is having a plan. (Or is that the key to life? I always forget.) The good news for beginning woodworkers is that you don’t need to develop the plan; you need only to follow it. Project plans are abundant and easily found (check out Chapter 21 for some project-plan resources). After you get familiar with the way plans are written, you can build just about anything (depending on your skills, of course).
If you have read any of my last few build tutorials you have probably caught me raving about this. I added my Kreg Trak and Stop System to my mobile miter cart designed by Brad of Fix This Build That, and it is a thing of both beauty and function. The time saving and accuracy are impossible to emphasize enough. I get really excited every time I do repeat cuts now.
But until then, I’ve been thinking of other ways to use my hands and create things. (Even though many of our saws and tools have been stolen.) But I’m feeling a little antsy to make some quick projects, because creating makes me extremely happy…..so we’re calling this surge in me to create something simple, THERAPY. In fact, I need to call up a few friends and have them make some with me because friends and creating is a favorite combo of mine! (Any out of town-ers want to fly in?! ;) )
Turn leftover wood or old pieces of furniture into DIY reclaimed wood projects! Wood is one of my favorite materials to work with. The possibilities are endless and they give such a homey and cozy feel to any rustic home. My husband, Dave, and I sometimes even go the extra mile and carve our initials on a little spot. It’s our own way of making our DIY project even more personal! Here’s a list of some of our favorite DIY reclaimed wood projects!
Block planes have become one of the most oft-used tools in a woodworker’s workshop. Some traditional woodworkers even keep them in their aprons! These little planes can be used to trim your joints, put chamfers on board edges, trim end grain, etc. I would recommend finding a low angle block plane, because the low angle lets you cut difficult grain more easily.
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
Speaking of safety, woodworking is one of the most dangerous hobbies that you can get into. Wood is harder than skin and bone, and the tools that you use to cut and shape wood can do real damage real fast if you happen to slip or make a mistake. Not to worry, though. Chapter 3 gives you the heads up on creating a safe shop in which to work and on keeping safe while working. As an added bonus, Chapter 19 offers ten habits to get into that can make your woodworking time accident free.
The block height’s going to be a personal thing, depending on what you use it for. Mine’s about knee height, which is on the low end, but I did use to do a tremendous amount of prepping straight from the tree. As you’re the same height as me, I’d say 33″ would be a tad on the high side. If you imagine you’ve got a longish piece of wood to work down the length, you want to be holding it almost vertical, rather than angled as it’s less likely to slip. The higher the working surface, the more angled it’s naturally going to become, hence why mine’s so low.
A super simple iPad Dock/stand made out of a single block of wood features an angled groove which gets to support the tablet device and a cut in a hole to revise access to the home button of your iPad. It’s possible to drill an access channel in the stand through which you can run a charging cable, although this mini stripped back iPad stand may have very limited functions.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Very interesting data! And I have to acknowledge the diminishing return on machine tools and the accretive returns of hand tools. But I do woodworking as a beloved hobby. It is great to spend time creating a classic dovetailed drawer from quartersawn oak using hand tools. But I don’t want to use my limited time preparing rough-milled stock to workable dimensions. So, I’m blessed to have a tablesaw, a jointer, a planer, and a bandsaw as well.
Don’t follow the temptation to cheap out and buy a cheap combination square. Because, like me, you will eventually have to replace it because of its inaccuracy. If you want your joinery to fit perfectly, then you need to scribe it accurately with precise marking tools. Unfortunately there is really only one company (that I know of) that makes a super accurate combination square. But fortunately it is amazing, and I use it daily. I’ll talk about it in-depth in the Layout & Measuring Tool Buying Guide.
Backpack storage and organizer Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Milwaukee hammer drill/impact combo, Diablo … [Read more...]
1: Table saw in place of a jointer. Any number of tips in previous issues address straightening edges of boards without a jointer. A jointer serves one purpose, but a tablesaw can serve many (just watch your local Craigslist for a decent one to come up.) The thickness planer is unavoidable, but until you can afford one, buy stock in the thickness you need.
Hand Tool Storage Cabinet and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid Drill/Impact combo, Bosch multipurpose drill bits … [Read more...]
If your wallet still cringes at the totals above, fear not, for the totals above are for all brand new tools. The one luxury we have in our modern day of hand tools is the large secondhand market where you might be able to scoop up some great tools – possibly even some of the actual tools that once inhabited these cabinets – for the original price in today’s dollars, or less. So before you break out the barbeque, give some thought to how you can free yourself from a mountain of modern tools and invest in a modest set of traditional hand tools that will get you started on the path to more enjoyable woodworking.
I am finally getting to practice my woodworking more after years of collecting tools. By using tool reviews and thinking of the kind of work I would like to do, I have accumulated a nice set of tools without purchasing many mistakes. I decided to use Paul Sellers book and videos and start learning from the beginning. He starts with projects that begin with a small set of tools. One of those tools is a spokeshave. Even though I know much of what is in the first lessons, I have picked up a few new tricks, and am learning to use my tools more efficiently. My most important tools are my workbench and vise. The workbench was tough to build as I was on the floor using hand planes; not a good way to work. I have no jointer; did get a small planer and made a sled for it so I can flatten a board. My tools are in my house, so there is no room for a big table saw or bandsaw. I have a chopsaw and a piece of an old Craftsman tablesaw I got for free. It has to be moved outside to use. A circular saw with a guide is handy. My guide has a plate on which the saw is mounted. The plate slides on aluminum angle (with help of rollers) which is screwed to plywood. Once the initial cut is made in the plywood, the plywood is simply lined up with your cut marks and clamped down.