Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.

The final step in any woodworking project is protecting the wood from moisture and damage. Chapter 18 includes lots of information about the most common types of topcoats. Because not all of them provide the same degree of beauty and protection, you get a chance to compare the pros and cons of each topcoat so that you can choose the best option for you and your project.
By completing a form on this website, you will be able to receive email correspondence from Canadian Woodworking.   These emails may include information on upcoming events or special offers for subscribers. If you do not wish to receive email correspondence please email orderdesk@canadianwoodworking.com  and ask to be removed from our email list. Every email that we send to you will include an "opt-out" from receiving future email correspondence. 
The fourth most important basic handheld power tool every beginner should buy is a random orbital sander. While palm sanders are less expensive and can use plain sandpaper (cut into one-fourth sections), the random orbital version uses hook-and-loop fastened sanding disks, and doesn't sand in patterns, using instead a random sanding motion. This will motion will serve to reduce the chance that any sanding marks may appear on the stock due to the sanding. Of course, be certain that your local woodworking supplier has sanding disks readily available in a number of grits to fit the model that you choose, as the key to proper sanding is to use progressively finer grits as you sand to reduce or remove any marks that are left behind from the previous sanding.
The very affordable coping saw (often around $20) is regularly used for rough cutting shapes in the board, but especially for removing waste from dovetail joints (one of the most common wood joints). An affordable coping saw will work just fine as long as you have plenty of replacement blades on hand (also very affordable). Read my hand saw buying guide for more detail on brands & features to look for when purchasing a coping saw.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
Youve seen a few shows on TV, and working with wood looks like it could be quite entertaining and rewarding. After all, you get to create something that you can proudly display to your friends and family. But where and how do you begin to move from expressed interest to hands-on experience? Woodworking For Dummies shows you how your raw building materials stack up, with everything you wood need to know about hardwood, softwood, plywood, veneer wood, plain-sawn wood, rift-cut wood, quarter-sawn wood, solid wood, man-made wood, and more. This down-to-earth guide gives you the goods on how boards are made from trees and the characteristics of hardwood and softwood species, plus all the buzz on Gearing up with the right tools Putting safety first in your workshop Using adhesives and glue Working with wood joints Smoothing it out by sanding and filling Adding color with stains and paints Protecting your work with topcoats Whether you want to put together a simple plywood bookcase or an incredible solid oak dining table, Woodworking For Dummies can help you get organized as you craft your plans for a piece thatll reflect your personal touch. Youll discover how to Measure and mark your wood Distinguish among saw designs Choose and use sharpening tools Hone in on hot melt glue Speed things up with modern frame joints Get down to the nitty-gritty on nails Apply water-based polyurethanes This handy reference packs in essential information for the novice woodworker and some advanced tips and tricks to jumpstart any woodworkers existing skills. Includes detailed illustrations and how-to photos.
Second, my table saw. I would love to have one of the big cabinet table saws that start in the four digit range, but, really, my Dewalt Job Site saw has done a mighty fine job for the three or so years we have owned it. The alignment continues to be right on, even after being toted around, and like every other Dewalt tool I have owned, it is an absolute work horse.

You've seen a few shows on TV, and working with wood looks like it could be quite entertaining and rewarding. After all, you get to create something that you can proudly display to your friends and family. But where and how do you begin to move from expressed interest to hands-on experience?"Woodworking For Dummies" shows you how your raw building materials stack up, with ...more
Through and through milling is the simplest and most efficient way to cut a log. Milling through and through results in plain-sawn, rift-sawn, and quarter-sawn boards because the orientation of the growth rings changes as the boards are sliced off the log (see the Choosing the right wood cut for you section later in this chapter for more information).
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.

Second, my table saw. I would love to have one of the big cabinet table saws that start in the four digit range, but, really, my Dewalt Job Site saw has done a mighty fine job for the three or so years we have owned it. The alignment continues to be right on, even after being toted around, and like every other Dewalt tool I have owned, it is an absolute work horse.
For our customers who are passionate about woodworking, we offer an extensive selection of tools and accessories to help your woodworking projects come to life. Whether you are a professional carpenter, construction manager or simply wish to build a DIY project, you will find everything that you need on our Amazon.com Woodworking page. Our selection ranges from, screwdriver sets to air filtration, band saws, sanders, drill presses, dust collectors, jointers, laminate trimmers, lathes, planers, benchtop, plate joiners, belt sanders, router combo kits, shapers, sharpener, barn door hardware, circular saws, router tables, router bits, planer, tool box, wood glue, nail gun, table saws, hammers and more.
Don’t follow the temptation to cheap out and buy a cheap combination square. Because, like me, you will eventually have to replace it because of its inaccuracy. If you want your joinery to fit perfectly, then you need to scribe it accurately with precise marking tools. Unfortunately there is really only one company (that I know of) that makes a super accurate combination square. But fortunately it is amazing, and I use it daily. I’ll talk about it in-depth in the Layout & Measuring Tool Buying Guide.

With all this tool talk, you’ll probably be tempted to buy every one that I describe in this book. Well, to keep you from going broke, I offer some advice on which tools to buy when, so that you can slowly and sanely build your workshop as you build your woodworking skills. See Chapter 4 for more on this topic. Chapter 8 helps you set up your shop so that you can get to all of your tools without hassle. You can also explore shop essentials, such as lighting and electrical requirements, to ensure that you can see what you’re doing and can run all the tools you want to use.
We’ve already done rope, and now we’re on to another rustic material we love: wood! It’s as basic of a material as clay and is constantly reinvented by DIYers, crafters, artists, hackers, and carpenters. To get inspired to create our own batch of cool wooden objects, we turned to our favorite fellow makers to see what projects they’ve come up with. Scroll down for our top DIY wood project picks.
Last, but not least…but often left until last, let’s talk routers. If you already own Ryobi batteries, this is the no-brainer entry-level router for you. As you get into doing more router work you will learn there are different kinds of routers (trim, combination, and full size). Honestly, I don’t own this router, and when I first purchased a router a number of years ago I had no idea what I was getting. If I did it again I would start here and get comfortable with it, then decide from there what my main applications are. I will add that if you are using a router table, which I totally recommend (I use this one), you will need a full size. My old router is going out right now, and I will likely replace it with this Bosch model.
×