11-2. Pipe clamps, I have about 10 of them with varying lengths of black pipe in 1′ increments. I can switch out the clamps for larger lengths on larger projects, or downsize as needed. (very rarely do I need more than 6 clamps on a project during drying time, and when I do, it’s time for a cup of coffee and a 1/2 hour break while I wait) You keep your initial investment down, and buy them as you need them to increase your collection.
Introduction.Part I: What's All the Buzz about Woodworking?Chapter 1: Discovering the Basics of Woodworking.Chapter 2: Wood You Be Mine? Appreciating Wood for All It's Worth.Chapter 3: Putting Safety First in Your Workshop.Part II: Tool Time: Selecting and Setting Up Your Equipment.Chapter 4: Gearing Up: Choosing Tools That Are Right for You.Chapter 5: Getting a Handle on Hand Tools.Chapter 6: Peeking at Portable Power Tools.Chapter 7: Introducing the Big Guns: Stationary Power Tools.Chapter 8: Setting Up Your Workshop and Maximizing Your Tools.Part III: Together Forever: Basic Wood Joinery.Chapter 9: Stuck on You: Using Adhesives and Glues.Chapter 10: Working with Wood Joints.Chapter 11: Making the Most of Mechanical Fasteners.Part IV: Getting Your Hands (and Shop) Dirty: Turning Raw Wood into Furniture.Chapter 12: Understanding the Building Process.Chapter 13: Banging Out Bookcases.Chapter 14: Tackling Tables.Chapter 15: Creating Cabinets.Part V: The Grand Finale: Sanding and Finishing Your Masterpiece.Chapter 16: Smoothin' It Out by Sanding and Filling.Chapter 17: Adding Color: Stains and Paints.Chapter 18: Protecting Your Work with Topcoats.Part VI: The Part of Tens.Chapter 19: Ten Great Habits to Get Into.Chapter 20: Ten Common Woodworking Pitfalls and How to Avoid Them.Chapter 21: Ten Great Woodworking Resources.Index.

To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.


Dummies has always stood for taking on complex concepts and making them easy to understand. Dummies helps everyone be more knowledgeable and confident in applying what they know. Whether it's to pass that big test, qualify for that big promotion or even master that cooking technique; people who rely on dummies, rely on it to learn the critical skills and relevant information necessary for success.

Always be on the lookout for usable wood. You might be able to salvage some. You can use a metal detector to find nails and screws. You don’t need a full fledged metal detector. I use a pinpointer made by Garrett. If your wood has some woodboring beetles you can still use it if not eaten too badly. A healthy dose of cyfluthrin will take care of them.
Last, but not least…but often left until last, let’s talk routers. If you already own Ryobi batteries, this is the no-brainer entry-level router for you. As you get into doing more router work you will learn there are different kinds of routers (trim, combination, and full size). Honestly, I don’t own this router, and when I first purchased a router a number of years ago I had no idea what I was getting. If I did it again I would start here and get comfortable with it, then decide from there what my main applications are. I will add that if you are using a router table, which I totally recommend (I use this one), you will need a full size. My old router is going out right now, and I will likely replace it with this Bosch model.
When woodworking is your profession, you rarely get to work on fun projects.  Woodcraft would like to help you find and make a project that is inspiring, fun and most of all out of your professional realm.  Woodcraft carries simple projects kits like bird houses as well as woodworking plans for doll houses, porch swings, pie safes and everything in between.  If you’re like me, my projects usually entail something that one of my family members wants and I was nominated to build! Browse our large selection of plans and project kits and have a little fun! 
But that’s not all. In this chapter I talk about one of modern times’ greatest gifts to the woodworker: manufactured boards (also called sheet goods) and veneers. Yep, wood technology can help you keep your sanity while also speeding up the process of making furniture. Oh, and it can also save you some bucks in the process. What’s not to like about that?

The final step in any woodworking project is protecting the wood from moisture and damage. Chapter 18 includes lots of information about the most common types of topcoats. Because not all of them provide the same degree of beauty and protection, you get a chance to compare the pros and cons of each topcoat so that you can choose the best option for you and your project.
I was telling my brother of the different ways I sharpen and he seemed interested in the slab/sandpaper method. When I went to get the extra supplies I picked up a slab of granite, adhesive, and sandpaper for sharpening. When the job was completed, the saw, the can of finish, and the slab with sandpaper were gifted to my brother. I could have shortened my list a little,
I’m not sold on the need for a power jointer for flattening a surface. That said, I do have a Shopsmith 4″ jointer.. It’s great for jointing edges, and perhaps flattening the occasional rails and stiles, but it of course is inadequate for surfacing wide boards. Would a six inch jointer be better…..not by much. So what do we do? Go to an eight inch, or better yet a ten inch jointer? Now we’re getting into really big, heavy, and electrically hungry machines that are not really suitable for the small shop that is likely to be in a small shed or garage.
If you can buy a bunch of tools at one time, you can save a ton on shipping, as the more you buy, the lower the rates. Also, take advantage of free shipping offers. Compare to see where you can get the best deal. Whatever you buy, make sure it is high quality. I have a Nicholson backsaw I bought at a local store before I knew of the woodworking suppliers. It has never been used much, but cuts much slower than saws such as Gramercy or Lie-Nielsen, even though mine have smaller teeth than the Nicholson.

about three years ago I thought to make even only a cutting board I would need a complete set of machines, stationary and handmachines, plus of course a few handtools for “hybrid woodworking”, then I discovered Peter Sellers and most importantly Chris and The Anarchist’s Tool Chest, that was a revelation! So I find it absolutely awesome that you show us how to start with even less tools (especially the advice for saws is great, much cheaper to only get rip)!

We have a small dining room area in our farmhouse that is separate from the living room and kitchen. The area is much smaller in space than our last house. I was little confused that our typical rectangular farmhouse table was not going to cut it. So, I walked in I came to know that we needed to build a round dining table. So, I searched for a plan design idea and build a very own round farmhouse dining table. I was an amazing DIY plan, I just love it!

Oakman, 1/12/2015 If you are planning on remaining a beginner then these are fine but..... The soles of the planes are not flat. Planes will only flatten a surface as flat as their soles and the ones I received are not flat and the work I would need to do in order to flatten the is excessive. The sides of both planes I received are not square. I sharpened the blades after cleaning the shipping oil from them. (they did arrive clean). I did get them adjusted to shave a nice thin strip off the piece I was working on but it was not flat due to the sole issues stated above. Had I performed these tests promptly upon receipt of the planes, I would have returned them. They will serve a purpose but they are not what I expected.


Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
Two things which I took to instantly and now wouldn’t want to do without are an old-fashioned two foot, four fold ruler which gets used all the time (there’s nothing that comes close to it) and a 1 1/2″ butt chisel which gets used all the time for marking anything which needs to be chopped e.g. the side of a mortice. It also means fewer chops and therefore a bit more accuracy when cutting out a knife wall.
When woodworking is your profession, you rarely get to work on fun projects.  Woodcraft would like to help you find and make a project that is inspiring, fun and most of all out of your professional realm.  Woodcraft carries simple projects kits like bird houses as well as woodworking plans for doll houses, porch swings, pie safes and everything in between.  If you’re like me, my projects usually entail something that one of my family members wants and I was nominated to build! Browse our large selection of plans and project kits and have a little fun! 
I created these hand tool buyer’s guides to help beginners who feel overwhelmed when trying to understand which hand tools they need first. It’s frustrating! Below you’ll see my summary list of the 20 basic professional woodworking hand tools that you should start to accumulate in order to start building the most basic woodworking projects. When you’re ready, you can follow the yellow buttons to visit each of the buying guides for each type of hand tool, to get help with understanding hand tool features, brands, & models. At the bottom of this page is a handy full list of tools that is sorted by “urgent”, “semi-urgent”, and “not-urgent” to buy.

The engineering involved in building this garden bench is pretty simple, and we have provided some links to get a full cut list and plans with photos to help you along the way. Additionally, to the stock lumber, you will need wood screws, barrel locks, and hinges to complete the table. A miter saw or hand saw is also extremely helpful for cutting down your stock to the correct angle and length.
For woodworking, you want wood with few defects and as good a grain pattern as possible. For the most part, you want the top two grades of wood: Firsts and Seconds. These two are often grouped together and referred to as FAS (Firsts and Seconds). Most decent lumberyards are well stocked with FAS boards and some Selects. The common classes aren’t used in furniture-making because they contain far too many defects.
2 small Japanese pull saws, a western push saw, fret saw, set of chisels, bit brace with a roll of arbor bits, rabbet plane, side rabbet (trim) plane, 2 shoulder planes, 3 set of diamond stones, slip stone, multiple files, a rasp or two, 2 small bar clamps, a mini vise, hand scrapers, scratch beader with cutters, combination plane with cutters, smoothing plane, jack plane, block plane, combination square, steel straight rule, 12′ tape measure, small bottle of glue, a few short dowels, 2 marking gauges, and a few different marking instruments (awl, pencils, marking knife).
Second, I assumed that you want to do things the fast and easy way and not necessarily the old-fashioned way. As you’ll likely find out by talking to other woodworkers, you can find almost as many ways to perform a task as you can find woodworkers. Everyone has his own unique way to do things and mine involves taking advantage of modern tools and shortcuts, rather than using old-fashioned, time-consuming, and often frustrating approaches that can be done better with modern tools and approaches (do you sense a little bias here?). For example, if you want to find out how to craft dovetails by hand with a chisel and backsaw, buy another book. But if you want to make joints that are just as strong and beautiful in a fraction of the time with a router and a jig, then this book is for you. (Don’t worry, in this book, you will still get to see many of the traditional ways things are done, if for no other reason than to help you decide for yourself how you want to approach a task.)

Go through all your wood and lay out where each cut is going to go. Choose the most appropriate part of the board for each part of the project. For instance, choose matching tabletop pieces for grain patterns and color consistency. Also, plan your cuts so that you do the minimum of saw adjustments (do all the crosscuts first and then all the rip cuts, for example).


This Welcome Farmhouse Sign post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Farmhouse style wood signs are a fun way to personalize your space. They are fairly easy to make yourself … [Read more...]
Second, I assumed that you want to do things the fast and easy way and not necessarily the old-fashioned way. As you’ll likely find out by talking to other woodworkers, you can find almost as many ways to perform a task as you can find woodworkers. Everyone has his own unique way to do things and mine involves taking advantage of modern tools and shortcuts, rather than using old-fashioned, time-consuming, and often frustrating approaches that can be done better with modern tools and approaches (do you sense a little bias here?). For example, if you want to find out how to craft dovetails by hand with a chisel and backsaw, buy another book. But if you want to make joints that are just as strong and beautiful in a fraction of the time with a router and a jig, then this book is for you. (Don’t worry, in this book, you will still get to see many of the traditional ways things are done, if for no other reason than to help you decide for yourself how you want to approach a task.)

It’s okay to buy wood with knots, splits, cracks, and checks. These defects affect only a small area of the board (if they exist over the majority of the board, don’t buy it), so you can plan your cuts around them. Avoid boards with warps, twists, or bows. It takes a lot of time to flatten a board that has one of these defects. To test for these defects, place one end of the board on the floor and hold the other end to your eye. The board should be straight and true. If not, leave it there.
Someone on here made the point that it took them a few years before they got a clear idea about what they wanted to make. I can relate to that. I’m starting to think that I’d like to do a cabinet type build so maybe a plough plane would help with that. There are plenty of old Stanley’s knocking around on Ebay. On the other hand, I’m in no hurry to buy anything else – I feel much more inclined now to make do and explore the limitations of tools that I’ve got.
Basic woodworking tools are different from beginner woodworking tools. For one thing, I don’t like to use the word “beginner” unless I am using it accurately. It’s not a very useful label, in my opinion, because it implies that there are clear-cut and hierarchical steps in your growth as a woodworker. Who wants to return to grade school during his or her valuable shop time? So I only use the word “beginner” when I’m talking about someone who is touching woodworking tools for the first time.
I agree, that’s a nice and easy set up to start with. I’d say a block plane it’s handy for small areas, and touch ups. A no.5 is excellent but a bit heavy and tiring sometimes. I find that a nice rabbet block plane (shoulder + block) with two irons with different sharpening angles it’s essential to me. One fine flat rasp and a medium flat file would complete my set.
​The plan tutorial includes images, diagrams, step-by-step instructions, and even a video to help you along the way. You can also go with some more bookcase design ideas. Browse the internet for more and we are also proving a link below to some more ideas to this plan. Select and build one of these free bookcase DIYs and you will have everything available easily that you need to get started creating a bookshelf for any room in your house.
If you can buy a bunch of tools at one time, you can save a ton on shipping, as the more you buy, the lower the rates. Also, take advantage of free shipping offers. Compare to see where you can get the best deal. Whatever you buy, make sure it is high quality. I have a Nicholson backsaw I bought at a local store before I knew of the woodworking suppliers. It has never been used much, but cuts much slower than saws such as Gramercy or Lie-Nielsen, even though mine have smaller teeth than the Nicholson.
Once you have the four aforementioned handheld power tools in your arsenal and you've had time to get comfortable with using them, its time to make your first (and likely most important) major tool purchase. The table saw is the heart and soul of every woodworking shop, the centerpiece around which all of the other tools are used and organized, so you'll want to buy the best table saw that your budget can comfortably afford. Take the time to learn which features you really want and the table saw that best fits your budget and your needs. This article will show you the most common features, and how to determine what features you need and how to know if those features are really well built, or simply added on to the saw because they are selling features.
It’s okay to buy wood with knots, splits, cracks, and checks. These defects affect only a small area of the board (if they exist over the majority of the board, don’t buy it), so you can plan your cuts around them. Avoid boards with warps, twists, or bows. It takes a lot of time to flatten a board that has one of these defects. To test for these defects, place one end of the board on the floor and hold the other end to your eye. The board should be straight and true. If not, leave it there.
To see if ShippingPass is right for you, try a 30-day free trial. Also, with ShippingPass, there is no need to worry about commitment. If you decide you want to discontinue the service, you can cancel your subscription at any time. No matter what your shipping needs, Walmart's got you covered. Sign up for ShippingPass so you can shop more, save money and live better.
If you can buy a bunch of tools at one time, you can save a ton on shipping, as the more you buy, the lower the rates. Also, take advantage of free shipping offers. Compare to see where you can get the best deal. Whatever you buy, make sure it is high quality. I have a Nicholson backsaw I bought at a local store before I knew of the woodworking suppliers. It has never been used much, but cuts much slower than saws such as Gramercy or Lie-Nielsen, even though mine have smaller teeth than the Nicholson.
I prefer the large size because it will cut the most sizes. Years ago I purchased a medium shoulder plane, but it didn’t cut the larger sized joints, so I sold it and purchased a large shoulder plane so I could cut and trim most sized joints. Most of your traditional woodworking hand tools can be vintage/used, but used shoulder planes can be very hard to rehab and get “square”, so I recommend spending the extra money on a new shoulder plane. See my recommendations in my hand plane buying guide.

A woodworking project wouldn’t be complete without the finish. Part V helps you make this often hated (trust me, I’m being nice here) process of sanding and finishing into a chore that you’ll love (okay, maybe just tolerate). Chapter 16 explores the often short-shrifted process of filling and sanding the wood smooth. Chapter 17 shows you how to add color to the wood. Chapter 18 demystifies the topcoat process. In this chapter, you discover the best type of finish for your project and go through the steps of applying it for best results.
The key to making furniture is having a plan. (Or is that the key to life? I always forget.) The good news for beginning woodworkers is that you don’t need to develop the plan; you need only to follow it. Project plans are abundant and easily found (check out Chapter 21 for some project-plan resources). After you get familiar with the way plans are written, you can build just about anything (depending on your skills, of course).
×