Nearly all of these links are affiliate, which means that I earn a small amount when you purchase one of them. It doesn’t cost you anything, so everyone is happy and I can keep bringing you free content. I only refer things I am happy with personally, and while you’ll notice a few dominant colors here, all opinions are completely my own. I try to give relatively affordable options, and in cases where I recommend spending a bit more it is because I am confident that it will save you more in the long run and be well worth the slight extra cost.

Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.
Super Chunky X Table Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid MegaMax, Diablo blades, Bosch drill bits and Makita … [Read more...]
For woodworking, you want wood with few defects and as good a grain pattern as possible. For the most part, you want the top two grades of wood: Firsts and Seconds. These two are often grouped together and referred to as FAS (Firsts and Seconds). Most decent lumberyards are well stocked with FAS boards and some Selects. The common classes aren’t used in furniture-making because they contain far too many defects.
Super Chunky X Table Plans and Tool Review is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. During this build, I'll be reviewing the Ridgid MegaMax, Diablo blades, Bosch drill bits and Makita … [Read more...]
Easy projects show how to get started with an increasingly popular hobby More than 18 million Americans have discovered how satisfying it is to build their own furniture. Packed with detailed illustrations and photographs, this book offers an easy-to-understand introduction to all aspects of woodworking-selecting hand and power tools, setting up a workspace, working with various types of wood, creating edges, joins, applying finishes, and more. Best of all, it includes lots of step-by-step woodworking projects-for dressers, book cases, tables, cabinets, and more-to help people dive right in and start playing in the sawdust. Jeff Strong (Lamy, NM) is a veteran For Dummies author as well as an accomplished wood-worker and furniture-maker who recently completed designs for a commercial line of furniture.
In this guest perspective from Bill Rainford, traditional joiner, we learn a powerful method for analyzing today’s tool prices and thinking about which tools you really need in your shop. This article is about woodworking hand tools, but as someone who has visited Bill’s shop, I can tell you that he is no hand-tool purist. You’d love some of the machinery, new and old, he has acquired and cared for over the years.
I agree, that’s a nice and easy set up to start with. I’d say a block plane it’s handy for small areas, and touch ups. A no.5 is excellent but a bit heavy and tiring sometimes. I find that a nice rabbet block plane (shoulder + block) with two irons with different sharpening angles it’s essential to me. One fine flat rasp and a medium flat file would complete my set.
I know I’ve been a little MIA but we’ve had a big project in the backyard, an overwhelming workload (which we planned on being MUCH less), and then decided to hire out for some help to haul away a huge amount of dirt.  Unfortunately, that ended up with the guy we hired stealing from us…..uggggh.  When will we ever learn to not be so trusting?!  Steve and I both have a problem with that……but when did being “too trusting” become such an extreme character flaw?!!  Sad.  Anyway, the whole situation is under investigation and there are some definite twists to the story that the crime-show-watcher in me would love to share with any other crime-show-watching enthusiasts out there. ;) Hopefully soon.
about three years ago I thought to make even only a cutting board I would need a complete set of machines, stationary and handmachines, plus of course a few handtools for “hybrid woodworking”, then I discovered Peter Sellers and most importantly Chris and The Anarchist’s Tool Chest, that was a revelation! So I find it absolutely awesome that you show us how to start with even less tools (especially the advice for saws is great, much cheaper to only get rip)!

There’s a lot of space above the shelf in most closets. Even though it’s a little hard to reach, it’s a great place to store seldom-used items. Make use of this wasted space by adding a second shelf above the existing one. Buy enough closet shelving material to match the length of the existing shelf plus enough for two end supports and middle supports over each bracket. Twelve-inch-wide shelving is available in various lengths and finishes at home centers and lumberyards.
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
More than a decade ago I spent 2 weeks in Maine aspiring to learn furniture making. On my return home I started enthusiastically planning to turn my basement into a proper shop – with all the “essential” tools I had learned to use. My list reflected my engineer’s preference for buying quality and quickly exceeded $25k in power tools alone (table saw, band saw, joiner, thickness planer, drill press…) even before solving the power, lighting and dust challenges.
I sincerely hope this list is helpful to you! Learning to build – to create from scratch things of beauty and function – has been one of the most personally satisfying and empowering experiences I have ever had. I love to see people take up tools and find their creative voice. Wherever you are at in your journey, from learning to read a tape measure to hand tooling furniture in your sleep, we are all in this together. So jump in, get your hands dirty, and let’s build something!
The owners, webmasters, administrators, authors and editors, expressly disclaim all and any liability to any person, whether a user of this website or not, in respect of anything and of the consequences of anything done or omitted to be done by any such person in reliance, whether whole or partial, upon the whole or any part of the contents of this website. Please exercise caution when working with any tools or machinery. Follow common safety rules and precautions as outlined in any manuals related to the equipment being used. If advice or other expert assistance is required, the services of a competent professional person should be sought.
After the wood is cut it needs to dry before it can be used, and drying the wood causes shrinkage in the board. So it’s important that the board be allowed to dry evenly or it twists, bows, or warps. If you buy wood from a lumberyard, it’s already been dried, but you want to acclimate it to your shop before you work with it. This way the wood will make any changes it needs to make with the different humidity level in your shop, and you don’t get any nasty surprises like a table leg that twists after you’ve glued your project together.
However, I would recommend that you either build a wooden workbench, or purchase one if you feel a workbench build is too advanced for you right now. However, I created the DVD “Building the Portable Moravian Workbench with Will Myers” so that even beginners can build a solid, portable, and very affordable workbench that will fit almost anywhere, using mostly or only hand tools. You can buy it in my store here. You can find Will’s free workbench plans for the Moravian Workbench here. Whichever path you choose, make sure you choose to either build or buy a heavy & sturdy wooden workbench, with at least a 3″ solid top, strong supportive base legs, and two strong vises.
Woodworking For Dummies shows you how your raw building materials stack up, with everything you wood need to know about hardwood, softwood, plywood, veneer wood, plain-sawn wood, rift-cut wood, quarter-sawn wood, solid wood, man-made wood, and more. This down-to-earth guide gives you the goods on how boards are made from trees and the characteristics of hardwood and softwood species, plus all the buzz on
After you have smoothed the wood, you can then decide whether you want to add any color and, if so, what type. You can choose from stain or paint and from water-based, oil-based, or lacquer-based products. You have many options and I’m sure you can find one that works for you. Chapter 17 helps you make sense out of all the choices and shows you how to apply these products.
Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.

Looking for a great gift for a friend or family member or maybe a Christmas gift? Recommended woodwork projects include a turned wood box with a lid or how to make a jewlery box. New to woodworking? Great! Check out these simple beginner’s woodworking projects. No matter the DIY woodworking project you can find your next gift idea in the wood craft videos listed below.
Own one junk chisel, probably about 1″. This will keep you from doing what you oughtn’t to your good chisels. It can be used and can be nearly trash. It’s going to hit caulk on masonry, junk stuck to the floor, interior cuts on thin sheets of aluminum, and other such abuse. If the back and bevel sort of intersect on an extra coarse stone, it’s sharp. I’ve sharpened mine on the concrete back stoop. (Not so great for the concrete)
I few years ago I made a build plan for Remodelaholic for a super adorable House Frame Bed. The build plan was inspired by this darling room shared by an Australian magazine, Home Life.  Over the years a few requests have been made for a full size mattress version. Here it is --> How to Build a House Frame Bed - Full Size This bed is designed to fit a full mattress 53" x … [Read more...]
Somehow I overlook #1, the jointer and thickness planer, and I saw all the other tools and immediately thought that this was my first set of tools I bought when I started working as a carpenter on a friend’s crew. Then I saw my oversight and just couldn’t get over how incongrous those two items were to the rest of the list. Had I seen a scrub plane and a jack plane I would have more harmony in the list.

Gord, 1/2/2013 Nice inexpensive starter set I purchased for my Little Brother. The planes were easy to disassemble for sharpening and the blades sharpened easily. The blades were ground a bit low in the center but was easily corrected with a course stone. There was a problem with the wooden box and after a few iffy phone calls a replacement box was received well before Christmas.
But before you purchase clamps, build your first project and put it together without glue. Then see how many clamps you think you will need to put enough pressure in all the right spots. Then proceed to purchase that number of clamps. Repeat this process on your next project, and purchase more clamps if needed. See my buying guide for different clamp types, uses, and my favorite brands.
This Welcome Farmhouse Sign post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. Farmhouse style wood signs are a fun way to personalize your space. They are fairly easy to make yourself … [Read more...]
2 small Japanese pull saws, a western push saw, fret saw, set of chisels, bit brace with a roll of arbor bits, rabbet plane, side rabbet (trim) plane, 2 shoulder planes, 3 set of diamond stones, slip stone, multiple files, a rasp or two, 2 small bar clamps, a mini vise, hand scrapers, scratch beader with cutters, combination plane with cutters, smoothing plane, jack plane, block plane, combination square, steel straight rule, 12′ tape measure, small bottle of glue, a few short dowels, 2 marking gauges, and a few different marking instruments (awl, pencils, marking knife).

Block planes have become one of the most oft-used tools in a woodworker’s workshop. Some traditional woodworkers even keep them in their aprons! These little planes can be used to trim your joints, put chamfers on board edges, trim end grain, etc. I would recommend finding a low angle block plane, because the low angle lets you cut difficult grain more easily.
×