You need tools to work with wood. And most woodworkers think tools are great. I know I love buying and using tools. Heck, I’m the first to admit I have a problem. (Does anyone know of a 12-step program for tool addicts?) I buy tools like candy (well, more than I buy candy, actually). I have special tools for almost any imaginable task and I can’t ever seem to get enough. Such is the life of a woodworker.
I am finally getting to practice my woodworking more after years of collecting tools. By using tool reviews and thinking of the kind of work I would like to do, I have accumulated a nice set of tools without purchasing many mistakes. I decided to use Paul Sellers book and videos and start learning from the beginning. He starts with projects that begin with a small set of tools. One of those tools is a spokeshave. Even though I know much of what is in the first lessons, I have picked up a few new tricks, and am learning to use my tools more efficiently. My most important tools are my workbench and vise. The workbench was tough to build as I was on the floor using hand planes; not a good way to work. I have no jointer; did get a small planer and made a sled for it so I can flatten a board. My tools are in my house, so there is no room for a big table saw or bandsaw. I have a chopsaw and a piece of an old Craftsman tablesaw I got for free. It has to be moved outside to use. A circular saw with a guide is handy. My guide has a plate on which the saw is mounted. The plate slides on aluminum angle (with help of rollers) which is screwed to plywood. Once the initial cut is made in the plywood, the plywood is simply lined up with your cut marks and clamped down.
Just bought this book.I want to learn to build things in wood.I have some tools but those joints are giving me problems. I have design books but how do I make a mortise joint or when to use tendon joint or a rabbit or use dowels? Who knew.I got some basic things but now I can actually finish my projects oh Joy.I can't wait till it arrives .Thank you Amazon and Hippo_Books for this book. When I get better at building stuff I will be back to update my review.Oh to all of you reviewers ....I bought this book cause of you.So thank you.
Somehow I overlook #1, the jointer and thickness planer, and I saw all the other tools and immediately thought that this was my first set of tools I bought when I started working as a carpenter on a friend’s crew. Then I saw my oversight and just couldn’t get over how incongrous those two items were to the rest of the list. Had I seen a scrub plane and a jack plane I would have more harmony in the list.
This doesn’t have to be true and you will find that a small set of tools can stretch a very long way and get you building quickly. Moreover it will light your path to future tool acquisitions by showing you clearly where a task could be made easier with a more specialized tool. For instance, a chisel can pretty much do anything in woodworking, but using just a chisel for some thing is just plain awful. But the chisel can do it so on that first project you may spend a bit more time with chisel and saw to cut that rabbet and when the next project comes around you invest in a rabbet plane. Slowly you start to build a comprehensive tool kit as the tools are needed.
Nearly all of these links are affiliate, which means that I earn a small amount when you purchase one of them. It doesn’t cost you anything, so everyone is happy and I can keep bringing you free content. I only refer things I am happy with personally, and while you’ll notice a few dominant colors here, all opinions are completely my own. I try to give relatively affordable options, and in cases where I recommend spending a bit more it is because I am confident that it will save you more in the long run and be well worth the slight extra cost.
This snowman kit post is sponsored by The Home Depot. I have been compensated for my time and provided with product. All ideas and opinions are my own. This post contains some affiliate links for your convenience. Click here to read my full disclosure policy. The snowflakes are falling softly on the ground. You grab your hat, coat and mittens and head outside to test the snow. … [Read more...]
Second, I assumed that you want to do things the fast and easy way and not necessarily the old-fashioned way. As you’ll likely find out by talking to other woodworkers, you can find almost as many ways to perform a task as you can find woodworkers. Everyone has his own unique way to do things and mine involves taking advantage of modern tools and shortcuts, rather than using old-fashioned, time-consuming, and often frustrating approaches that can be done better with modern tools and approaches (do you sense a little bias here?). For example, if you want to find out how to craft dovetails by hand with a chisel and backsaw, buy another book. But if you want to make joints that are just as strong and beautiful in a fraction of the time with a router and a jig, then this book is for you. (Don’t worry, in this book, you will still get to see many of the traditional ways things are done, if for no other reason than to help you decide for yourself how you want to approach a task.)
Part IV is filled with really cool projects. The purpose of this section is to give you some woodworking experience and to progressively build your skills. Chapter 12 leads you through the process of making a project so that you know what you’re getting into before you begin cutting wood. Chapter 13 gets you started woodworking with the easiest project to build — a bookcase. Not just one bookcase, but several, so you’re sure to find one that fits your design ideals. Chapter 14 builds on the skills you developed in Chapter 13 by helping you build tables. Like Chapter 13, you have several table designs to choose from (heck, build ’em all; you can never have too many tables!). Chapter 15 ups the ante by providing projects for making cabinets with either drawers or doors. Again, you get to choose among several really good designs (if I do say so myself).
Nightstand table plans have everything you need to create a bedside table to keep every needy thing at reach at night time. This Nigh Stand plan is quite different in design from the most of the other plans. This stand has not only the three regular drawers but also having a hidden drawer that uses a secret locking mechanism to keep contents securely.
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
Real quick story: Recently, I had to help my brother with some furniture and cabinet issues, but there were a few problems. First he lived 3 hours by car and my wife needed our only car. I’ve had a scooter for a few years, but have only used it for local trips with small needs. Since weather was changing and I needed a break away from my other half, I decided to make the trip. I installed my motorcycle saddlebags to the scooter and loaded the necessary tools for the trip. Where’s the motorcycle? That’s another story. Of course the saddlebags are small and the scooter only had a massive 50cc engine; vrmm, vrmm. Although I have a shop full of electric and traditional hand tools, only the smaller hand tools would make the list for this trip. So, here is the list from that trip: (A few may be missing)
*Northern Ireland, Scottish Highlands and Islands usually receive a 2-3 working day service for First Class. For Tracked Courier, it’s a 2 working day service and you need to order by 15:00. Unfortunately, we don't currently offer Express Delivery outside the UK, Gibraltar, Guernsey or Jersey. All deliveries are subject to cut-off times and public holidays.
In the sixty years of woodworking I have found two tools of increasing necessity. One is a band saw. I can do most of my work with a band saw and hand plane. The second tool is a bow saw, or actually several bow saws. They will replace the band saw if required, though they are slow. One I made about twenty years ago has a one and a half inch wide rip blade and is about thirty inches long. I think the blade is from an old industrial band saw blade I picked up and sharpened into a rip saw blade. It works very well on ripping lumber, logs, etc. Though it tires me out to much to use it now.