The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
Thank you for this post. I am about three years into wood working with handtools. I didn’t want to be a handtool collector. I wanted a good set of tools I could use. Since funds were tight and I wasn’t sure if I would keep doing this, I wanted to build my tools slowly. What you outlined is more or less what I ended up getting and it has indeed served me well. One can easily do a lot with all of these tools. At some point about two years into the hobby, I had a much better feel for what I wanted to make and what I may or may not need beyond this.
Introduction.Part I: What's All the Buzz about Woodworking?Chapter 1: Discovering the Basics of Woodworking.Chapter 2: Wood You Be Mine? Appreciating Wood for All It's Worth.Chapter 3: Putting Safety First in Your Workshop.Part II: Tool Time: Selecting and Setting Up Your Equipment.Chapter 4: Gearing Up: Choosing Tools That Are Right for You.Chapter 5: Getting a Handle on Hand Tools.Chapter 6: Peeking at Portable Power Tools.Chapter 7: Introducing the Big Guns: Stationary Power Tools.Chapter 8: Setting Up Your Workshop and Maximizing Your Tools.Part III: Together Forever: Basic Wood Joinery.Chapter 9: Stuck on You: Using Adhesives and Glues.Chapter 10: Working with Wood Joints.Chapter 11: Making the Most of Mechanical Fasteners.Part IV: Getting Your Hands (and Shop) Dirty: Turning Raw Wood into Furniture.Chapter 12: Understanding the Building Process.Chapter 13: Banging Out Bookcases.Chapter 14: Tackling Tables.Chapter 15: Creating Cabinets.Part V: The Grand Finale: Sanding and Finishing Your Masterpiece.Chapter 16: Smoothin' It Out by Sanding and Filling.Chapter 17: Adding Color: Stains and Paints.Chapter 18: Protecting Your Work with Topcoats.Part VI: The Part of Tens.Chapter 19: Ten Great Habits to Get Into.Chapter 20: Ten Common Woodworking Pitfalls and How to Avoid Them.Chapter 21: Ten Great Woodworking Resources.Index.
However, I would recommend that you either build a wooden workbench, or purchase one if you feel a workbench build is too advanced for you right now. However, I created the DVD “Building the Portable Moravian Workbench with Will Myers” so that even beginners can build a solid, portable, and very affordable workbench that will fit almost anywhere, using mostly or only hand tools. You can buy it in my store here. You can find Will’s free workbench plans for the Moravian Workbench here. Whichever path you choose, make sure you choose to either build or buy a heavy & sturdy wooden workbench, with at least a 3″ solid top, strong supportive base legs, and two strong vises.
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
Very interesting data! And I have to acknowledge the diminishing return on machine tools and the accretive returns of hand tools. But I do woodworking as a beloved hobby. It is great to spend time creating a classic dovetailed drawer from quartersawn oak using hand tools. But I don’t want to use my limited time preparing rough-milled stock to workable dimensions. So, I’m blessed to have a tablesaw, a jointer, a planer, and a bandsaw as well.
Slice, dice and serve in style on this easy, attractive board. We’ll show you a simple way to dry-fit the parts, scribe the arc and then glue the whole thing together. We used a 4-ft. steel ruler to scribe the arcs, but a yardstick or any thin board would also work. Find complete how-to instructions on this woodworking crafts project here. Also, be sure to use water-resistant wood glue and keep your board out of the dishwasher or it might fall apart. And one more thing: Keep the boards as even as possible during glue-up to minimize sanding later. For great tips on gluing wood, check out this collection.
Home Recording For Dummies. Jeff began creating sawdust at a very early age while assisting his father, a master craftsman, build fine furniture. He has designed and build countless pieces of furniture and has recently completed the designs for a commercial line of furniture blending Arts and Crafts and Asian infuences which has already secured representation with a gallery in Santa Fe, New Mexico.
The Delta 22-555 Portable Thickness Planer is great The Delta 22-555 Portable Thickness Planer is great for professional results in the woodworker's shop. It features two polyurethane feed rollers for a no-slip grip on the work piece; positioned close to the cutter head to improve work piece finish. The machine also has precision machined steel cutter head for ... More + Product Details Close
Oakman, 1/12/2015 If you are planning on remaining a beginner then these are fine but..... The soles of the planes are not flat. Planes will only flatten a surface as flat as their soles and the ones I received are not flat and the work I would need to do in order to flatten the is excessive. The sides of both planes I received are not square. I sharpened the blades after cleaning the shipping oil from them. (they did arrive clean). I did get them adjusted to shave a nice thin strip off the piece I was working on but it was not flat due to the sole issues stated above. Had I performed these tests promptly upon receipt of the planes, I would have returned them. They will serve a purpose but they are not what I expected.
About forty years ago I purchased a Shopsmith Mark V because I lacked space for a large shop, and also moved around the United States a lot. Later I purchased another Shopsmith Mark V Model 510 for the increase in table size and flexibility. I do wood working as a hobby, not to do many projects as fast as possible. I also have every tool and accessory that Shopsmith makes for the two primary tools. Their quality is excellent, and while I enjoy antique tools like the 1912 three phase electric Camel Back Drill Press I purchased for my son’s shop, the Shopsmith does every thing I have ever needed.
1. Power jointer and thickness planer. I have developed various means of straightening the edges of my stock with hand-held tools, but I don’t see a way to efficiently flatten the faces of rough or reclaimed lumber without a power jointer. It’s part of the first few steps for any furniture project, and I want to be able to move through this step quickly and into the more interesting work. The thickness planer is also a huge time-saver, compared to hand-held tools.
Chapter 13 details making bookcases — the basic part of a carcass. Chapter 14 digs into tables where you get a chance to practice your edge-to-edge joints for building tabletops and use the most common and durable joint that exists — the mortise and tenon. Chapter 15 goes a little farther by providing plans to make a dresser and an armoire. By the time you finish with these chapters, you’ll be well on your way to feeling comfortable making furniture and will be ready to tackle more ambitious projects.
My Stanley 51/2 was in a bit of a state when I got it and refurbing it took a bit of time and cash. Now it works a treat and looks like new. I’m nearly through the bench build and have spend hours using it – it really is a workhorse piece of kit. I did some final cleaning up of some oak legs the other day and I can’t really see how a smaller plain would do a better job.
Speaking of rugged simplicity and hand tools kit – I’m very surprised to not see an axe in it! I still remember how I was amazed to see a board being split by an axe in the spoon rack premium video. Do you plan to make a blog post on this sort of topic (also because not everyone has access to premium videos)? Would be interesting to see what other coarse tools you use and when and why, and your thoughts around them. After all, the longer we stay at coarse stage the less time it will take to make something and the more efficient we are.
Jeff Strong, of Lamy, New Mexico is not only an accomplished craftsman and woodworker, but is also author of Drums For Dummies and Home Recording For Dummies. Jeff began creating sawdust at a very early age while assisting his father, a master craftsman, build fine furniture. He has designed and build countless pieces of furniture and has recently completed the designs for a commercial line of furniture blending Arts and Crafts and Asian infuences which has already secured representation with a gallery in Santa Fe, New Mexico.
Sometimes Grandparents can be hard to buy gifts for, they seem to have everything already. But hey you can't go wrong with darling gifts of grand kids, right!?! In this post I'm going to share a couple of ideas for personalized photo gifts. To make the photo gifts, I will be using Photoshop Elements 2018. I have been using Photoshop Elements ever since I graduated from trying … [Read more...]
It is my understanding that frame saws are standard to a continental toolkit. Richard’s list of a hard-point handsaw, 10-12” backsaw, and coping saw is a very standard British/American toolkit, that preforms the same roles as the frame saws you detailed. All three are available in every hardware store in America and I assume in Britain, true hardware store back saws are now junk and to get something new that preforms as well an old Disston, like Richard stated, you have to upgrade to likes of Veritas and Lie-Nielsen.
John P, 3/18/2014 I lost most of my tools in the divorce. I have gotten a tool here and there over the past few years. I needed a plane and went to Google to see what was available. I found this starter set and placed my order. The planes exceeded my expectation and I have used them successfully on several projects. I recommend this starter set to all without reservation!
Whether you’re a seasoned woodworker or DIY pro, you’ll find the woodworking tools you need for the jobsite or around the house. Search woodworking project plans to get some fresh ideas or browse our wide tool selection to find exactly what you need. Outfit your woodworking shop with routers, sanders, table saws, dust collectors, planing tools, and hand tools from bestselling brands including Makita, Festool, Bosch, JET, Powermatic, Rockler, Grizzly, and more.
This time I surprised one of my favorite dice games and took it outside. I made a set of wooden dice in just a few hours, and instead of sitting in the room and doing nothing, we are taking our dice game out into the yard. With this set of wooden dice, dice games are becoming our favorite backyard game. Check out the step by step tutorial below so you can make your own.
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
Using shelving in your room or kitchen is a great way to arrange and de-clutter space… I know, such ground-breaking term it is. Do not write me off yet, I just want to show you how you can build some clean floating corner shelving that appears to have no brackets. You can create them at no cost, and the hardest part of the plan is figuring out what you are going to put on these shelves when you are finished.
Dan, my work space that is available for power tools is quite small, about 6′ x 20′. It may seem like a lot on the surface, but a long rectangle is a bear to work in. It requires a lot of serpentine action. That said, I don’t have too much room for large footprint tools. I have settled finally on three big tools; a small bench saw, a thickness planer, and a drill press. I had to forgo the jointer, so I use hand tools to make up for it’s absence (as I do with a lot of my hand tool techniques). I have gotten to the point where I can flatten one side and true an edge of a board reasonably quick. I then finish it up with the thickness planer and table saw, giving me a nice flat board. I guess what I am basically saying is, there’s more than one way to skin a cat, and don’t write off hand tools as a quaint way to experience the past. They worked for thousands of years, and still do! Thanks for the blogs, they make for great reading.
Personally identifying information is information that can be used to identify who you are such as: name, mailing address, email address. To enter certain areas of the site, you will be required to register and provide information about yourself. This information is for the purposes of Canadian Woodworking and helps us to tailor the site to best meet the needs of our audience.
For our customers who are passionate about woodworking, we offer an extensive selection of tools and accessories to help your woodworking projects come to life. Whether you are a professional carpenter, construction manager or simply wish to build a DIY project, you will find everything that you need on our Amazon.com Woodworking page. Our selection ranges from, screwdriver sets to air filtration, band saws, sanders, drill presses, dust collectors, jointers, laminate trimmers, lathes, planers, benchtop, plate joiners, belt sanders, router combo kits, shapers, sharpener, barn door hardware, circular saws, router tables, router bits, planer, tool box, wood glue, nail gun, table saws, hammers and more.
I've only been woodworking for a few months and am still very much a novice. I bought this book hoping to learn some creative, but easy methods or time saving tips, but as my title implys, this book contains only the most basic of techniques. However, this book is very good for understanding basic terminology. This was my first "for dummies" book so maybe I was expecting too much. A few episodes of the New Yankee Workshop and/or a few hours of browsing the internet and you can learn the majority of what this book covers.
As far as I’m concerned, you can never have too many project plans to choose from. For example, I may like a Craftsman-style table, but you may think that the style is too clunky looking and prefer the elegant lines of a Shaker design. With this in mind, I provide three chapters of project plans, each with several variations on basic projects that not only give you some great furniture but also help you progressively build your woodworking skills.
Just for the record, a jointer and planer are not from the ICDT kit – the philosophy on that column is, indeed, beginner AND basic (hence the Workmate). The tools we suggest in the ICDT manual are for those who are working at a kitchen table or in a backyard; the tools the editors would recommend for someone who is quite sure he or she wants to pursue serious furniture making would be rather different.
As someone who finds hand planing a challenge the minimalist approach seems like the best way to truly learn a tools quirks and develop the skill required. So the Veritas BU planes are going along with the Tormek required to sharpen those gargantuan irons and a diamond plate and oil stone are on the way to get my old Stanley no 5 humming. I never found a sharpening routine that didn’t look a ball ache to keep the BU planes working well and being a stick thin wimp the weight of the buggers for anything more than controlled smoothing shavings knackered me out.